ICPDAS RM-22.22

Levertijd:
2~7 dagen
SKU
RM-22.22

2 Poles, 20 A relay for direct 35 mm rail (EN 50022) mounting

● Double phase switch 2 NO (DPST-NO)
● 35 mm rail (EN 50022) mount
● 17.4mm wide
● Test button


ICPDAS RM-22.22 - 2 Poles, 20 A relay for direct 35 mm rail (EN 50022) mounting
Meer informatie
Art.nr.
RM-22.22
Fabrikant
ICPDAS
Special
Contact Configuration 2 NO (DPST-NO)
Rated current/Maximum peak current 20/30A
Rated voltage/Maximum switching voltage 250/400V
Rated load in AC1 5000VA
Rated load in AC15 (230V AC) 1000VA
Single phase motor rating (230 V AC) N/A
Breaking capacity DC1:30/110/220 V 20/0.3/0.12A
Minimum switching load 1000(10/10) mW(V / mA)
Standard contact material AgSnO2
Coil Specification
Nominal voltage (UN) 24VDC
Rated DC power DC 1.25
Operating range 21.6~26.4 VDC
Technical Data
Mechanical life 50.000 cycles
Electrical life at rated load in AC1 100.000 cycles
Operate/release time 15/8ms
Maximum impulse duration Continuous
Insulation between coil and contacts (1.2/50 μs) 4kV
Ambient temperature range -40 °C ~ +40 °C
Protection Category IP 20
Technical Data
Contact Specifications
Nominal rate lamps
Incandescent (230V) 1000W
Compensated Fluorescent (230V) 360W
Insulation
Dielectric Strength
Between supply and contacts 3500VAC
Between open contacts 2000VAC
Between adjacent contacts 2000VAC
Other Data
Bounce Time
NO 5 ms.
NC 10 ms
Power Lost to the Environment 
Without Contact Current 1.2W
With Rated Current 3.2 ~ 5.2W
Max. Wire Size
Coil Terminals
Solid Cable Stranded Cable
1x4/2x2.5 mm2 1x2.5/2x2.5 mm2
1x12/2x14 AWG 1x14/2x14 AWG
Max. Wire Size
Contact Termianls
Solid Cable Stranded Cable
1x6/2x6 mm2 1x6/2x4 mm2
1x10/2x10 AWG 1x102x12 AWG
Mijn vraag gaat over: ICPDAS RM-22.22
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top