Ga naar het einde van de afbeeldingen-gallerij

Ga naar het begin van de afbeeldingen-gallerij

ICPDAS CANopen module of 4-channel 14-bit analog output module - CAN-2024C

Levertijd:

2~7 dagen

SKU

CAN-2024C

CANopen module of 4-channel 14-bit analog output module

● NMT Slave
● Read-Back Accuracy ±1% of FSR
● Provide default EDS file
● ESD Protection 4 kV Contact for each channel
● Support Power Supply +10 VDC ~ +30 VDC
● Support CiA DS-301 v4.02, DSP-401 v2.1
● Support PDO Mapping

Brochure EN

Details

CANopen is one kind of the network protocols based on the CAN bus and mainly used for embedded network system, such as industrial machine control , vehicle control system, factory automation, medical equipments control, remote data acquisition, environmental monitoring, and packaging machines control, etc.

The CAN-2024C module follows the CiA DS-301 version 4.02 and DSP-401 version 2.1. It is easy to access the analogue I/O status and set the configuration by using the standard CANopen protocol. The CAN-2024C has passed the validation of the CiA CANopen Conformance Test tool. Therefore, the provided EDS file is standard for any other standard CANopen masters.

Owing to the 4-channel analog output and the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements. For more information about the CANopen master interfaces and other CANopen products, please refer to the following web site.

APPLICATIONS:

SPECIFICATIES

Meer informatie

Art.nr.

CAN-2024C

Fabrikant

ICPDAS

CANopen Interface

NMT	Slave
Error Control	Node Guarding protocol or Heartbeat Consumer
No. of PDOs	10Rx , 10Tx
PDO Modes	Event Triggered, Remotely requested, Cyclic and acyclic SYNC
PDO Mapping	Available
No. of SDOs	1 server, 0 client
Emergency Message	Yes
CANopen Version	DS-301 v4.02
Device Profile	DSP-401 v2.1
Specification	ISO 11898-2, CAN 2.0A
Baud Rate (bps)	10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, and 1 M
Node ID	1 ~ 99
Terminator Resistor	Switch of 120 Ω terminator resistor
Connector	5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
EDS file	Yes

Analog Output

Output Channels

Output Type

0~ 5 V, ± 5 V, 0~ 10 V, ± 10 V, 0 ~ 20 mA, 4 ~ 20 mA

Resolution

14-bit

Accuracy

± 0.1 % of FSR for voltage output ; ± 0.2 % of FSR for current output

Zero Drift

Voltage	±30μV/°C
Current	±0.2μV/°C

Span Drift

±20ppm/°C

Voltage Output Capability

10V@5mA

Current Load Resistance

External +24 V: 1050 Ω

Power-Up and Safe Value

Yes

Intra-module Isolation, Field to Logic

3000 VDC

LED Indicators

CANopen Status	3 LEDs to PWR, RUN and ERR
Terminal Resister	1 LED to terminator resister indicators

Power

Power Supply	Unregulated +10 ~ +30 VDC
Power Consumption	1.5 W

Mechanical

Installation	DIN-Rail
Dimensions (w x l x h)	32.5 x 110 x 102mm

Omgeving

ESD Protection	4 kV Contact for each channel
Operating Temperature	-25 °C ~ +75 °C
Storage Temperature	-30 °C ~ +80 °C
Humidity	10 ~ 90% RH, non-condensing

Stel uw vraag

U bent wellicht ook geïnteresseerd in de volgende producten:

ICPDAS CANopen module of 4-channel 14-bit analog output module - CAN-2024C

Laatste nieuws